The N1 Single-Cell Dispenser revolutionizes applications that demand precise isolation, sorting, and dispensing of individual cells. Whether it’s B-cell identification for antibody discovery or monoclonal CHO cell line development, the N1 Single-Cell Dispenser simplifies these tasks significantly. Researchers can now streamline single-cell genomics assays by directly plating single cells into PCR plates, unlocking new possibilities for high-throughput analyses. Achieve unparalleled accuracy and efficiency is single cell dispensing with the N1 Single-Cell Dispenser and transform the way you approach critical applications that rely on single-cell isolation.

96-well plating: 9 minutes
384-well plating: 33 minutes

Environmental Use: Indoor
Temperature Range: 15-30°C
Humidity Range: <80% relative humidity

Device Dimensions:
(H) 6.5 in X (W) 8.4 in X (D) 8.3 in
(H) 16.5 cm X  (W) 21.4 cm X (D) 21.1 cm
Weight: 5.5 lbs (2.5 kg)
Power: DC Input, 24 V, 1A

Applications with temperature sensitive samples, such as Stem cells or Neuronal cells can be challenging to sort. Such applications would benefit from modules such as the CS1 Chiller-Stirrer by keeping both sheath fluid and sample at the desired temperature during the sorting process. This allows for a more desirable environment for temperature sensitive cells and increases viability of the sorted samples. Additional to the cooling mechanism, the CS1 Chiller-Stirrer can provide stir function for samples that settle quickly or aggregate. This will maintain single-cell suspension which will improve sort recovery and purity.

Stirring Speed: 50-300 RPM
Chilling Temperature: 4-24°C (39.2-75.2oF)

Environmental Use: Indoor
Temperature: 15°C to 25°C (59°F to 77°F)
Humidity: 5%-60%

Device Dimensions:
(H) 5.3 in X (W)  5.9 in X (D) 3.7 in
(H) 13. 5 cm X (W) 14.9. cm X (D) 9.3 cm
Controller Module Dimensions:
(H) 5.32 in X (W) 5.87 in X (D) 3.67 in
Weight: 3 lbs (1.36 kg)
Power: 100-240 VAC, 50-60 Hz, 1.1A

The CX2 Collection Cooler keeps sorted cells at a safe 4 ±3°C for 75 minutes. When using three CX2s in sequentially, valuable cells are kept at the optimum temperature for viability for the entire duration (6 hours) of a bulk sorting run.

The easy-to-use CX2 Collection Cooler replaces the collection tube holder on the WOLF or WOLF G2 Cell Sorter. Used in conjunction with the CS1 Chiller-Stirrer, it enables to keep temperature-sensitive samples and sorted cells in an optimal environment for the entire workflow.

Chilling Temperature: 4 ±3°C ( 39.2 ±5.4°F)
Chilling Time: 75 minutes;
indefinitely when 3 CX2s are used in succession

Environmental Use: Indoor
Temperature: 15°C to 25°C (59°F to 77°F)
Humidity: 5%-60%

Device Dimensions:
(H) 2.6 in X (W) 1.6 in X (D) 2.1 in
(H) 6.5 cm X (W) 4.0 cm X (D) 5.4 cm
Weight: 78 g - 80 g
Storage Conditions (when in use): -20°C
Storage Conditions (when not in use):
Room temperature